LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Seats >> Seat Heaters >> Seat Heater Test >> Driver's Seat

Driver's Seat

  1. Remove the driver's seat (see FRONT SEAT REMOVAL/INSTALLATION ).
  2. Disconnect the 4P connector (A) and 2P connector (B) from the seat heater.
    Fig 1: Identifying Seat Heater 4P And 2P Connector Terminal
    G05493022

    Seat-back 

  3. Check for continuity between the B1 and B2 terminals of the seat-back heater 2P connector. There should be continuity.
  4. Check for continuity between the A1*1 (A3)*2 and A2*1 (A4)*2 terminals, and the A1*1 (A4)*2 and B2 terminals. There should be continuity.

    * 1:'04-05 models

    * 2:'06-08 models

  5. If the continuity check is not as specified, replace the seat heater.
scientia non olet · About LEMON Manuals