LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2005 >> TSX Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Gauges & Instrument Panels >> Gauges >> Rewriting the ODO Data and Transferring the Maintenance Minder on a New Gauge Control Module >> Procedure

Rewriting the ODO Data and Transferring the Maintenance Minder on a New Gauge Control Module: Procedure

  1. Before replacing the gauge control module, connect the HDS.
  2. Select GAUGES from the BODY ELECTRICAL menu display.
  3. Select "Gauge Control Module Replacement (ODO rewrite)" from the ADJUSTMENT menu, and follow the instructions on the display to retrieve the ODO value and the Maintenance Minder Information.
  4. Replace the gauge control module.
  5. Follow the instructions on the display to write the new ODO value and Maintenance Minder to the new gauge control module. If the data transfer fails, refer to the following instructions to release the locked ODO data.
scientia non olet · About LEMON Manuals