LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 3.5RL >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Rear Disc Brake Pads >> Installation

Rear Disc Brake Pads: Installation

  1. Install caliper bracket and mounting bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS . Install pad retainers. Apply Molykote® M77 (or equivalent) compound to both sides of inner and outer pad shims. Install brake pads and shims on caliper bracket. Install inner pad with wear indicator downward.
  2. Push in piston so caliper will fit over brake pads. Install brake caliper and mounting bolt. Tighten caliper mounting bolt to specification. See TORQUE SPECIFICATIONS . Pump brake pedal several times to seat pads. Check for leaks at hose and line joints or connections. Retighten or repair as necessary. Bleed brakes if necessary. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals