Parking Brake Lining Break-In
NOTE:
Perform this procedure only when new parking brake shoes or new rear brake discs have been installed.
- Check parking brake adjustment. See ADJUSTMENT CHECK under PARKING BRAKE.
- With parking brake adjusted correctly, park car on firm, level surface.
- Keep parking brake release lever pulled up. Press parking brake pedal with 66 ft. lbs. (294 N) of pressure. Drive vehicle for 1/4 mile at about 31 MPH. Stop vehicle for 5-10 minutes to allow brake discs to cool.
- Repeat step 3 one more time.
- Check parking brake adjustment. See ADJUSTMENT CHECK under PARKING BRAKE.