LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2003 >> 1.7EL Standard >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Air Bag Restraints System >> SRS (Supplement Restraints System) >> Driver's Airbag Replacement >> Removal

Driver's Airbag Replacement: Removal

  1. Disconnect the battery negative cable and wait at least 3 minutes before beginning work.
  2. Remove the access panel (A) from the steering wheel, then disconnect the connector between the cable reel 4P connector (B) and driver's airbag 4P connector (C).
    Fig 1: Removing Access Panel From Steering Wheel
    G01961511
  3. Remove the two Torx bolts (A) using a Torx T30 bit. Then remove the driver's airbag (B).
    Fig 2: Removing Torx Bolts
    G01961512
scientia non olet · About LEMON Manuals