LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 2001 >> 3.2CL Base >> Repair and Diagnosis (Single Page) >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Adjustments >> Brake Booster Push Rod

Brake Booster Push Rod

NOTE: Brake Booster Push Rod adjustment procedures are not available for MDX models.

If brake booster is removed, measure push rod length between center of clevis hole and mounting surface at back of booster. Adjust push rod length to 4.6" (116.0 mm). See Fig 1 . Check pedal height and free play after installing master cylinder. See BRAKE PEDAL HEIGHT & FREE PLAY  .

Fig 1: Measuring Booster Push Rod Length (Typical)
G96C20992Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals