Ambient Temperature Indicator
NOTE:
Ambient temperature indicator can be recalibrated to 3 degrees greater or 3 degrees less than actual outside temperature.
- Turn ignition switch to ON position. Depress SELECT and RESET button for 10 seconds. While holding RESET button, the display will scroll through temperature settings from 3 degrees greater to 3 degrees less than actual temperature. When desired temperature value appears on display, release RESET button and recalibrated ambient temperature will be displayed.
- If ambient temperature indicator is off by more than 3 degrees, turn ignition off and repeat step 1 .
- To recalibrate display to actual temperature, remove sensor from vehicle. With sensor removed from vehicle but still connected to harness, submerge sensor and a thermometer in a container of ice water. Repeat step 1 . Compare thermometer reading to indicator display and set accordingly.