Removal & Installation (3.2TL)

Tilt steering wheel down. Remove steering column upper cover. Remove 2 instrument cluster assembly screws above instrument cluster assembly. Release instrument cluster assembly clips along bottom, then top. See Fig 1. Pull instrument cluster assembly out.
Disconnect electrical connectors. Remove instrument cluster assembly. Cover steering wheel with a protective cloth. Remove 4 instrument cluster screws. Carefully pry instrument cluster out of assembly and disconnect connectors.
If necessary, remove gauges. See Fig 2. To install, reverse removal procedure.

Fig 1: Removing Instrument Panel (3.2TL - With Navigation System)

Courtesy of AMERICAN HONDA MOTOR CO., INC.

Fig 2: Removing Gauges (3.2TL)

Courtesy of AMERICAN HONDA MOTOR CO., INC.