LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Removal & Installation >> Front Disc Brake Pads >> Installation

Front Disc Brake Pads: Installation

  1. Install bracket and bracket bolts. Tighten bolts to 81 ft. lbs. (110 N.m). Lubricate shim and sliding surfaces with high-temperature silicone grease. Install pad retainers. Apply Molykote(R) M77 compound to both sides of pad shims and back of pads.
  2. Install inner and outer pad shims. Install brake pads in brackets. Install inner brake pad with pad wear indicator on the inside. Push piston into caliper bore with finger pressure so caliper will fit over pads.
  3. Position caliper and install caliper bolts. Tighten bolts to specification. See TORQUE SPECIFICATIONS. Press brake pedal several times to seat pads. Bleed brakes if necessary. See BLEEDING BRAKE SYSTEM .
scientia non olet · About LEMON Manuals