LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> Integra GS-R, 2D Coupe >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Adjustments >> Parking Brake

Parking Brake

  1. Raise and support rear of vehicle. Ensure rear brake caliper lever contacts brake caliper pin. See Fig 1. Pull parking brake lever up one notch.
  2. Remove end panel from rear of parking brake lever cover. Tighten equalizer nut until rear wheels drag slightly when turned. Release brake lever. Rear wheels should rotate freely. Rear wheels should lock when lever is pulled up with a force of 44 lbs. (20 kg) applied to parking brake lever (about 6-10 clicks on Integra, or about 7-11 clicks on 2.2CL, 2.3CL or 3.0CL).
Fig 1: Checking Brake Caliper Lever Position (Integra Shown; 2.2CL, 2.3CL & 3.0CL Are Similar)
G92D00508Courtesy of AMERICAN HONDA MOTOR CO., INC.
scientia non olet · About LEMON Manuals