LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 2.5TL >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transmission Diagnosis - BAXA, B6VA & MDWA) >> Self-Diagnostic System >> Retrieving Fault Codes >> Notes

Retrieving Fault Codes: Notes

WARNING: This page is about a different car, the 1998 Honda Odyssey, 1998 Honda Accord, and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: During diagnostics, ensure "D4" indicator light on A/T gear position indicator is not turned on by a fault in the PGM-FI system. The PGM-FI system controls the fuel injection system. To repair PGM-FI system, see appropriate SELF-DIAGNOSTICS article in ENGINE PERFORMANCE. After PGM-FI system has been repaired, clear fault codes. See CLEARING FAULT CODES  . After fault codes have been cleared, road test vehicle for several minutes at over 30 MPH and recheck fault codes.
NOTE: Before any diagnostic procedure, obtain radio anti-theft code from customer. Note radio preset stations, as radio stations and clock setting will be cleared and must be reset. Radio anti-theft code must be re-entered for radio operation.