LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1998 >> 2.5TL >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Automatic Transmission Diagnosis - BAXA, B6VA & MDWA) >> Component Testing >> MAINSHAFT Speed Sensor

MAINSHAFT Speed Sensor

WARNING: This page is about a different car, the 1998 Honda Odyssey, 1998 Honda Accord, and 1998 Acura 2.3CL. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect harness connector from mainshaft speed sensor located on side of transaxle. See Figure . Using a DVOM, measure resistance between sensor terminals. Replace mainshaft speed sensor if resistance is not 400-600 ohms.

scientia non olet · About LEMON Manuals