Oil Pressure Gauge Test
Remove instrument cluster. See INSTRUMENT CLUSTER under REMOVAL & INSTALLATION. Remove oil pressure gauge from instrument cluster. Using an ohmmeter, measure resistance of oil pressure gauge. See OIL PRESSURE GAUGE RESISTANCE table. See Figure . Replace oil pressure gauge if resistance is not as specified.
NOTE:
Resistance value between terminals No. 2 and 8 includes resistance value for fuel gauge, since these terminals are shared with fuel gauge.
OIL PRESSURE GAUGE RESISTANCE
| Terminals No. | Ohms |
|---|---|
| 2 & 1 | 55.8-68.2 |
| 1 & 8 | 79.2-96.8 |
| 2 & 8 | 100.8-123.2 |