LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1997 >> 3.5RL >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Removal & Installation >> Vehicle Speed Sensor (VSS) >> Removal & Installation

Removal & Installation

Vehicle Speed Sensor (VSS) is located on left side of engine next to engine oil filter. Turn ignition switch to OFF position and disconnect VSS 3-pin connector. Remove VSS, using care not to lose drive link. See Fig 1 . To install, reverse removal procedure.

Fig 1: Locating Vehicle Speed Sensor Components (Similar)
G96B06639Courtesy of AMERICAN HONDA MOTOR CO., INC.