LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1995 >> NSX Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes & Drum Brakes >> Overhaul >> Front Disc Brake Caliper >> Disassembly

Front Disc Brake Caliper: Disassembly

CAUTION: DO NOT put hand in front of piston when using air pressure to remove piston.
NOTE: Ensure brake fluid does not spill on painted surfaces, as damage to finish will result.
  1. Disconnect brake hose from caliper. Remove caliper. See FRONT DISC BRAKE CALIPER  . Remove pad spring from caliper body.
  2. Slowly apply 30 psi (2.1 kg/cm2 ) air pressure to brake fluid inlet port to force piston from caliper bore. Remove piston boot and piston seal. Ensure caliper bore is not scored or damaged during removal of seal. Discard rubber components.
scientia non olet · About LEMON Manuals