LEMON Manuals: Even more car manuals for everyone
Home >> Acura >> 1987 >> Legend LS, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Driver Information Center >> Component Testing >> Engine Oil Level Switch

Engine Oil Level Switch

  1. Remove right front inner fender. Disconnect BLU/BLK wire from the positive terminal of engine oil level switch.
  2. There should be continuity between the engine oil level switch terminal and engine ground with proper engine oil level. There should be no continuity when no engine oil is left in oil pan. If switch is not okay, remove oil pan and check for disconnected wire between positive terminal and switch. If wire is okay, replace switch.
scientia non olet · About LEMON Manuals