Fuel Gauge: Legend
- Remove access cover in luggage compartment area. Ensure ignition is off. Disconnect 3-pin connector from sending unit. Connect a jumper wire between Yellow/White and Black wire terminals. Turn ignition on. Ensure pointer starts to move toward "F" mark on gauge.CAUTION: Turn ignition off within 5 seconds, before gauge pointer reaches "F" mark. Failure to turn ignition off before pointer reaches "F" mark may cause damage to fuel gauge.
- If fuel gauge pointer does not move, check for blown No. 13 (10 amp) fuse. Check for an open circuit in Yellow, Yellow/White and Black wires. Check for poor ground. Replace fuel gauge if fuse and wiring check okay. Check sending unit if gauge checked okay in step 1).