Coolant Temperature Gauge: Legend
- Turn ignition off. Disconnect Yellow/Green wire from sending unit. Ground sending unit wire using a jumper wire. Turn ignition on. Ensure pointer starts to move toward "H" mark on gauge.CAUTION: Turn ignition off within 2 seconds, before gauge pointer reaches "H" mark. Failure to turn ignition off before pointer reaches "H" mark may cause damage to temperature gauge.
- If temperature gauge pointer does not move, check for blown No. 13 (10 amp) fuse. Check for an open circuit in Yellow and Yellow/Green wires. Replace temperature gauge if fuse and wiring check okay. Check sending unit if gauge checked okay in step 1).