Fuel Gauge Sending Unit: Legend
Remove access cover in luggage compartment area. Ensure ignition is off. Disconnect 3-pin connector at sending unit. Remove fuel gauge sending unit using Wrench (07GAC-SE0020A). Measure resistance between sending unit terminals "A" and "B". See Fig 1 . Also, see the FUEL GAUGE SENDING UNIT RESISTANCE table.
FUEL GAUGE SENDING UNIT RESISTANCE
| Float Position | Ohms |
|---|---|
| Full | 2-5 |
| 1/2 | 25.5-39.5 |
| Empty | 105-110 |