Removal

WIPER / WASHER: WASHER MOTOR (for Front Side): REMOVAL

1. REMOVE FRONT WHEEL RH

2. REMOVE FRONT FENDER LINER RH

(a) Using a screwdriver, turn the pin 90 degrees and remove the pin hold clip.





(b) Remove the 8 clips and 4 screws.





(c) Remove the 3 grommets and front fender liner RH.

HINT
The grommets need to be replaced with new ones because they will break when they are removed.

3. DRAIN WASHER FLUID

(a) Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.





4. REMOVE WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY

(a) Disconnect the connector.





(b) Remove the windshield washer motor and pump assembly.