Removal

HEATING / AIR CONDITIONING: FRONT BLOWER MOTOR: REMOVAL

1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Instrument Panel Under Cover) Removal

2. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/o PTC Heater)

(a) Disengage the clamp.





(b) Disconnect the connector.

(c) Remove the 3 screws and the blower motor sub-assembly.

3. REMOVE BLOWER MOTOR SUB-ASSEMBLY (w/ PTC Heater)

(a) Disengage the clamp.





(b) Remove the quick heater connector screw.

(c) Disconnect the connector.

(d) Remove the 3 screws and the blower motor sub-assembly.