Disassembly

SLIDING ROOF / CONVERTIBLE: SLIDING ROOF HOUSING: DISASSEMBLY

1. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

(a) Using a T25 "TORX" socket wrench, remove the 3 screws.





(b) Remove the sliding roof drive gear sub-assembly.

2. REMOVE SUNSHADE TRIM SUB-ASSEMBLY

(a) Remove the sunshade trim stopper.





HINT
Use the same procedure for the RH side and the LH side.

(b) Slide and remove the sunshade trim sub-assembly.