Audio Unit

Audio Unit: Removal and Installation

Removal

1) Remove the cluster lid C. Refer to [Cluster Lid C: Removal and Installation] Cluster Lid C.
2) Remove the center ventilator grilles (RH/LH). Refer to [Ducts and Grilles: Removal and Installation] Removal and Installation.
3) Remove the audio control panel screws (A), then remove the audio unit assembly, from cluster lid C.





4) Remove the audio unit screws (A), using power tool.





5) Remove the audio unit brackets (2), then pull out the audio unit (3) from the audio control panel (1).

Installation

Installation is in the reverse order of removal.