P0365

DTC P0365 CAMSHAFT POSITION SENSOR "B" CIRCUIT (BANK 1)

1. OUTLINE OF DIAGNOSIS
Detect the open or short circuit of the camshaft position sensor.
Judge as NG when the number of camshaft signals remains abnormal.

2. COMPONENT DESCRIPTION










3. ENABLE CONDITION






4. GENERAL DRIVING CYCLE
Always perform the diagnosis continuously.

5. DIAGNOSTIC METHOD

Abnormality Judgment
Judge as NG when the status where the number of camshaft position sensor signal in two engine revolutions is less than 3 time(s).






Time Needed for Diagnosis: 2 engine revs. x 4 time(s)
Malfunction Indicator Light Illumination: Illuminates as soon as a malfunction occurs.

Normality Judgment
Judge as OK and clear the NG when the malfunction criteria below are met.






Time Needed for Diagnosis: Two engine revolutions