Clear Memory Mode

Clear Memory Mode

OPERATION

1) On [[Main Menu]] display, select {Each System Check}.
2) On [[System Selection Menu]] display, select {Brake Control System}.
3) When {VDC} is displayed, select the [OK] button.
4) On [[Brake Control Diagnosis]] display, select {Clear Memory}.
5) When the [[Clear Memory ?]] is shown on the screen, click the [YES] button.
6) When [[Done]] and [[Turn off the ignition switch.]] are shown on the screen, turn the ignition switch to OFF.

NOTE:
For detailed operation procedures, refer to "PC application help for Subaru Select Monitor".