LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2005 >> Outback F6-3.0L >> Repair and Diagnosis >> Sensors and Switches >> Sensors and Switches - Restraints and Safety Systems >> Seat Occupant Sensor >> Testing and Inspection >> Initial Inspection and Diagnostic Overview >> Initial Inspection

Initial Inspection

INSPECTION

Before performing diagnosis, check the following items which might affect the occupant detection system problems.

1. BATTERY
Measure the battery voltage and specific gravity of electrolyte, and check the electrolyte amount.

Standard voltage: 12 V, or more
Specific gravity: 1.260 or more
Electrolyte: Between the upper level and lower level

2. AIRBAG SYSTEM
Read the DTC of airbag system, and check that there is no malfunction in airbag system.

Standard: DTC is not displayed.