High Mount Stop Lamp Replacement (Sedan)

High Mount Stop Lamp Replacement (Sedan)

Removal Procedure

1. Remove the liftgate garnish moulding. Refer to Liftgate Garnish Molding Replacement (Coupe) (Service and Repair)Liftgate Garnish Molding Replacement (Sedan) (Service and Repair).




2. Remove the high mounted stop lamp.
Release the 6 clips (1).
3. Remove the high mounted stop lamp.

* Release the wiring harness plug (2) and remove.
* Remove the hose (3) from the wash/wipe system.

Installation Procedure

1. Install in the high mounted stop lamp.

* Connect the hose for the washer/wiper system.
* Connect the wiring harness plug.
* Install the 6 clips.

2. Install the liftgate garnish moulding. Refer to Liftgate Garnish Molding Replacement (Coupe) (Service and Repair)Liftgate Garnish Molding Replacement (Sedan) (Service and Repair).