Air Dam: Service and Repair

Air Deflector Replacement - Front Bumper Fascia

Removal Procedure




1. Remove the front air deflector to fascia screws.
2. Remove the front air deflector to engine cradle push-in retainers.
3. Remove the front air deflector by lowering from the vehicle.

Installation Procedure




1. Align the front air deflector to the fascia.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the front air deflector to fascia screws.

Tighten the screws to 5 Nm (44 lb in).

3. Install the front air deflector to engine cradle push-in retainers.