Shift Interlock Solenoid: Service and Repair

Automatic Transmission Shift Lock Actuator Replacement

Removal Procedure

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26 - 3.8L) (Service and Repair)Battery Negative Cable Disconnection and Connection (LS4 - 5.3L) (Service and Repair) .
2. Remove the center console. Refer to Front Floor Console Replacement (Removal and Replacement) .




3. Disconnect the automatic shift lock actuator electrical connector.




4. Remove the automatic shift lock actuator from the pivot point (1), the base of the shift lock control and the vehicle.



Installation Procedure





1. Install the automatic shift lock actuator to the base of the shift lock control and the pivot point (1).




2. Connect the automatic shift lock actuator electrical connector.
3. Install the center console. Refer to Front Floor Console Replacement (Removal and Replacement) .
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection (L26 - 3.8L) (Service and Repair)Battery Negative Cable Disconnection and Connection (LS4 - 5.3L) (Service and Repair) .