Seat Belt Replacement - Center Rear

Seat Belt Replacement - Center Rear

Removal Procedure





1. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .
2. Remove the center rear seat belt nuts (1).
3. Remove the center rear seat belts from the vehicle.



Installation Procedure


Important: Verify that the rear seat belt anchors are installed in their proper orientation.






1. Install the center rear seat belts to the vehicle.

Notice: Refer to Fastener Notice .

2. Install the center rear seat belt nuts (1).

Tighten the nuts to 42 N.m (31 lb ft).


Important: Be sure to route the buckle correctly through the seat cushion.


3. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement (Rear Seat Cushion Replacement) .