Global Positioning System (GPS) Antenna Replacement

Global Positioning System (GPS) Antenna Replacement

Removal Procedure





1. Remove the instrument panel (I/P) upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement (Service and Repair) .
2. Remove the push pins retaining the Global Positioning System (GPS) antenna assembly to the I/P retainer.
3. Disconnect the electrical connector.



Installation Procedure





1. Connect the electrical connector.
2. Install the GPS antenna to the I/P retainer, and align with the retainer mounting holes.
3. Install the push pins to the antenna.
4. Install the I/P upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement (Service and Repair) .