LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2001 >> Aztek V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Emission Control Systems >> Evaporative Emissions System >> Evaporative Emission Control Canister >> Canister Vent Valve >> Service and Repair

Canister Vent Valve: Service and Repair

EVAPORATIVE EMISSION (EVAP) CANISTER VENT VALVE REPLACEMENT

REMOVAL PROCEDURE




1. Remove the fuel tank.
2. Disconnect the Evaporative Emission (EVAP) canister vent solenoid harness connector.
3. Remove the EVAP vent hose from EVAP canister solenoid.




4. Bend the EVAP canister vent bracket tab to release the EVAP canister vent solenoid.
5. Remove the EVAP canister solenoid (2) from the fuel tank.

INSTALLATION PROCEDURE




1. Slide the EVAP canister vent solenoid (2) on the EVAP canister vent bracket until the solenoid snaps into place.
2. Connect the EVAP vent hose to the EVAP canister vent solenoid.




3. Connect the EVAP canister vent solenoid harness connector.
4. Install the fuel tank.
scientia non olet · About LEMON Manuals