Rear Seat Back Cushion Trim Panel Replacement

Rear Seat Back Cushion Trim Panel Replacement

Removal Procedure




1. Remove the center of the push-pin retainer from the rear seat back trim panel using a small flat-bladed tool.




2. Remove the push-pin retainer from the seat back trim panel.




3. Remove the seat back trim panel from the rear seat back.

Installation Procedure




1. Place the seat back trim panel to the rear seat back.




2. Install the outer portion of the push-pin retainer to the seat back trim panel.




3. Install the push-pin retainer pressing into place until fully seated.