Liftgate Window Latch

Liftgate Window Latch









Removal and Installation

NOTE: Make sure the liftgate window glass is in the raised position.

1. Remove the liftgate trim panel.

2. Disconnect the liftgate window latch ajar switch electrical connector.

3. NOTE: Mark the position of the liftgate window latch prior to removing the liftgate window latch bolts.

Remove the 2 bolts and the liftgate window latch.

- To install, tighten to 12 Nm (106 lb-in).





4. NOTE: The liftgate window latch must be checked to make sure the latch is installed and aligned correctly.

To install, reverse the removal procedure.