B-Pillar Upper Trim Removal/Installation

B-PILLAR UPPER TRIM REMOVAL/INSTALLATION

1. Partially peel back the seaming welts.

2. Remove the following parts:
a. Front scuff plate Front Scuff Plate Removal/Installation

b. Rear scuff plate Rear Scuff Plate Removal/Installation

c. B-pillar lower trim B-Pillar Lower Trim Removal/Installation

d. Adjuster anchor cover Front Seat Belt Removal/Installation

e. Upper anchor installation bolts on the front seat belt Front Seat Belt Removal/Installation

3. Pull the B-pillar upper trim in the direction of the arrow shown in the figure, then detaching clips A and pin B.






4. Remove the B-pillar upper trim in the direction of the arrow shown in the figure.






CAUTION:
- When removing the B-pillar upper trim, be careful not to damage the tab C.

5. Install in the reverse order of removal.