B-Pillar Lower Trim Removal/Installation

B-PILLAR LOWER TRIM REMOVAL/INSTALLATION

1. Remove the front scuff plate. (See Front Scuff Plate Removal/Installation)

2. Remove the rear scuff plate. (See Rear Scuff Plate Removal/Installation)

3. Partially peel back the seaming welt.

4. Pull the B-pillar lower trim in the direction of the arrow (1), (2) shown in the figure, detach tab A, pin B, pin C, clip D.






5. Remove the B-pillar lower trim in the direction of the arrow (3) shown in the figure.






6. Install in the reverse order of removal.