Windshield Washer Reservoir: Service and Repair

WINDSHIELD WASHER TANK REMOVAL/INSTALLATION

Vehicles With The Headlight Cleaner

1. Disconnect the negative battery cable.

2. Disconnect the windshield washer motor connector.






3. Disconnect the headlight cleaner motor connector.

4. Disconnect the headlight cleaner relay connector.

5. Disconnect the windshield washer hose from joint pipe A.

6. Disconnect the headlight cleaner hose from joint pipe B.

7. Remove the bolts, then remove the windshield washer tank.

8. Install in the reverse order of removal.

Vehicles Without The Headlight Cleaner

1. Disconnect the negative battery cable.

2. Disconnect the windshield washer motor connector.






3. Disconnect the windshield washer hose from joint pipe A.

4. Remove the bolts, then remove the windshield washer tank.

5. Install in the reverse order of removal.