LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Mazdaspeed3 L4-2.3L Turbo >> Repair and Diagnosis >> Body and Frame >> Seats >> Service and Repair >> Overhaul >> Rear Seat >> Rear Seat Cushion Removal/Installation

Rear Seat Cushion Removal/Installation




REAR SEAT CUSHION REMOVAL/INSTALLATION

1. Detach the hooks from the grommets by pulling the rear seat cushion in the order of (1), (2) in the direction of the arrow shown in the figure, while remove the wire.






2. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals