Information Display Input/Output Check Mode

INFORMATION DISPLAY INPUT/OUTPUT CHECK MODE

NOTE:
- In this mode, it is possible to verify the items in the following chart.

Check Code Table

Check Code 01-09:

NOTE:
- The check codes are displayed in numerical order. (While performing the inspection, if you want to inspect a check code with a number smaller than the code number you are currently inspecting, terminate the check mode then repeat the inspection from the beginning.)






Check Code Inspection

Check code 01





Check code 02





Check code 04

Step 1-Step 2:

Check code 09

Step 1-Step 5:

All segments illuminated