LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 5 L4-2.3L >> Repair and Diagnosis >> Heating and Air Conditioning >> Blower Motor >> Service and Repair >> Removal and Replacement >> Rear Blower Unit Removal/Installation

Rear Blower Unit Removal/Installation




REAR BLOWER UNIT REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the center console. Center Console Removal/Installation

3. Disconnect the rear power MOS FET connector and rear blower motor connector.

4. Remove the rear blower unit.






5. Install in the reverse order of removal.