LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 5 L4-2.3L >> Repair and Diagnosis >> Brakes and Traction Control >> Antilock Brakes / Traction Control Systems >> Testing and Inspection >> Component Tests and General Diagnostics >> DSC HU/CM Inspection

DSC HU/CM Inspection




DSC HU/CM INSPECTION

1. Disconnect the DSC HU/CM connector.

2. Connect the negative battery cable.

3. Attach the tester lead to the DSC HU/CM wiring harness-side connector and inspect voltage, continuity, or resistance according to the standard (reference) on the table.

Terminal Voltage Table (Reference)





Terminal Voltage Table (Reference) (Part 1):





Terminal Voltage Table (Reference) (Part 2):





scientia non olet · About LEMON Manuals