LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2010 >> 5 L4-2.3L >> Repair and Diagnosis >> Body and Frame >> Interior Moulding / Trim >> Trim Panel >> Service and Repair >> Removal and Replacement >> Front Side Trim Removal/Installation

Front Side Trim Removal/Installation




FRONT SIDE TRIM REMOVAL/INSTALLATION

1. Remove the front scuff plate inner. Front Scuff Plate Removal/Installation

2. Remove the fastener.






3. Pull the front side trim in the direction shown by the arrow, then detach clip A and locator pin B.

4. Install in the reverse order of removal.

scientia non olet · About LEMON Manuals