Clearing DTC - Multi Information Display

CLEARING DTC [MULTI INFORMATION DISPLAY]

1. Connect the M-MDS to the DLC-2.






2. After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

- When using the IDS (laptop PC)

1 Select "Self Test".
2 Select "Modules".
3 Select "MID".

- When using the PDS (Pocket PC)

1 Select "Module Tests".
2 Select "MID".
3 Select "Self Test".

3. Verify the DTC according to the directions on the screen.

4. Press the clear button on the DTC screen to clear the DTC.

5. Switch the ignition to off.

6. Switch the ignition to ON and wait for 5 s or more.

7. Perform the DTC inspection. DTC Inspection - Multi Information Display

8. Verify that no DTCs are displayed.