Information Display Removal/Installation

INFORMATION DISPLAY REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Upper column cover Service and Repair

b. Instrument cluster Removal and Replacement

c. Center panel Center Panel Removal/Installation

d. Audio unit Audio Unit Removal/Installation

e. Center cover Center Cover Removal/Installation

f. Dashboard upper panel Dashboard Upper Panel Removal/Installation

g. Hole cover Hole Cover Removal/Installation

3. Remove the screws and wiring harness clip.






4. Remove the information display.

5. Disconnect the connector.






6. Install in the reverse order of removal.