Cowl Panel Removal/Installation

COWL PANEL REMOVAL/INSTALLATION

1. Remove the windshield wiper arm and blade. (See Windshield Wiper Arm And Blade Removal/Installation)

2. Remove the front fender molding. (See Cowl Grille Removal/Installation)

3. Remove the cowl grille. (See Cowl Grille Removal/Installation)

4. Remove the washer hose grommet from the cowl panel and disconnect the front washer hose.

5. Remove the windshield wiper motor. (See Windshield Wiper Motor Removal/Installation)

6. Remove the bolts A and bolt B.






7. Remove the cowl panel in the direction of the arrow shown in the figure.






8. Install in the reverse order of removal.