B-Pillar Lower Trim Removal/Installation

B-PILLAR LOWER TRIM REMOVAL/INSTALLATION

WARNING:
- Handling the side air bag sensor improperly can accidentally deploy the side air bag module, which may seriously injure you. Read AIR BAG SYSTEM SERVICE WARNINGS before working around the B-pillar areas. (See Air Bag System Service Warnings.)

NOTE:
- The side air bag sensor is located in the B-pillar.

1. Remove the front scuff plate. Front Scuff Plate Removal/Installation

2. Remove the rear scuff plate. Rear Scuff Plate Removal/Installation

3. Pull the area marked A, then remove one side of the B-pillar lower trim.






4. Pull the B-pillar lower trim outward and remove it.

5. Install in the reverse order of removal.