Lower Panel Removal/Installation

LOWER PANEL REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Dashboard under cover (Driver side) Dashboard Under Cover Removal/Installation

b. Side wall Side Wall Removal/Installation

c. Console panel (LH) Console Panel Removal/Installation

d. Hood release lever Service and Repair

3. Remove the screw.






4. Detach clips A and hook B by pulling them in the direction of the arrow.

5. Remove the hook B.

6. Disconnect the head light leveling switch connector and TCS OFF switch connector.

7. Disconnect the BSM OFF switch connector. (Vehicles with BSM)

8. Disconnect the PLG switch connector. (Vehicles with PLG)

9. Disconnect the cabin temperature sensor connector and air hose.

10. Remove the lower panel.

11. Install in the reverse order of removal.