Dashboard Garnish Removal/Installation

DASHBOARD GARNISH REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the following parts:
a. Decoration panel Decoration Panel Removal/Installation

b. Front console box mat Front Console Box Mat Removal/Installation

c. Indicator panel Indicator Panel Removal/Installation

d. Front console box Front Console Box Removal/Installation

e. Center panel Center Panel Removal/Installation

f. Side panel Side Panel Removal/Installation

3. Remove the screw.






4. Detach clips A by pulling them in the direction of the arrow.

5. Remove the dashboard garnish.

6. Install in the reverse order of removal.