B-Pillar Lower Trim Removal/Installation

B-PILLAR LOWER TRIM REMOVAL/INSTALLATION

1. Remove the front scuff plate inner. Front Scuff Plate Removal/Installation

2. Remove the rear scuff plate inner. Rear Scuff Plate Removal/Installation

3. Remove the front seat belt lower anchor installation bolt (Driver side). Front Seat Belt Removal/Installation

4. Partially peel back the seaming welt.






5. Detach tabs A and clips B and D, and pins C, by pulling them in the direction of the arrow.

6. Remove the B-pillar lower trim.

7. Install in the reverse order of removal.