Front Door: Adjustments

DOOR ADJUSTMENT

1. Loosen the door hinge installation bolts.

2. Adjust the gap and height difference to the standard range by moving the door back and forth, left and right.






Clearance
- a: 2.5-4.5 mm {0.10-0.17 in}
- b: -1.0-1.0 mm {-0.03-0.03 in}
- c: 2.5-4.5 mm {0.10-0.17 in}
- d: -1.0-1.0 mm {-0.03-0.03 in}
- e: 2.5-4.5 mm {0.10-0.17 in}
- f: -1.0-1.0 mm {-0.03-0.03 in}
- g: 3.0-6.0 mm {0.12-0.23 in}
- h: 0-1.5 mm {0-0.05 in}

3. Tighten the bolts or screws.

4. If the front door and rear door dose not open/close smoothly, loosen the door